The Active Body Control chassis is the introduction of a new, active and innovative suspension system to the market. The suspension system operates at roughly 30 bar and therefore requires a device that is specially designed to withstand these pressures for emptying, flushing and filling. Work on the suspension system must be carried out not only in the event of damage to the suspension system itself, but also during repair and replacement work on other parts such as the wishbone. In order to guarantee correct filling and to avoid damage to the system, proper maintenance can only be carried out with this device.
Filling and Bleeding Device for eSuspension SDS 5
Article-No. 400.500.000
Made in GL GmbH
TECHNICAL DATA |
|
Max. Working pressure |
40 bar |
Volume of fresh oil tank |
8 liters |
Volume of used oil tank |
10 liters |
Mains cable length |
3,000 mm |
Mains voltage |
230 V / 50 Hz |
Dimensions ( Length × Width × Height ): |
66,00 × 65,00 × 96,00 cm |
Item weight: |
87,00 kg |
Article-No. |
400.500.000 |
Approved by Daimler AG.
Công Ty Cổ Phần Thiết Bị Tân Minh Giang tự hào là nhà cung cấp thiết bị hàng đầu tại Việt Nam. Chuyên cung cấp các thiết bị hỗ trợ công việc nhanh và chuyên nghiệp cho những kỹ thuật viên sửa chữa ô tô, các công ty, đại lý ô tô, các xưởng sữa chữa ô tô và các nhà máy, xí nghiệp.
⇒ Sản phẩm đa dạng , chất lượng, xuất xứ - nguồn gốc rõ ràng.
⇒ Chế độ hậu mãi về chăm sóc và bảo hành sản phẩm, chế độ bảo trì thiết bị theo tiêu chuẩn của nhà sản xuất ,thay thế các linh kiện và phụ tùng chính hãng với giá ưu đãi.
⇒ Nhân viên tư vấn, hỗ trợ, lắp đặt nhiệt tình, tận tâm.
Hãy đến và trải nghiệm sản phẩm, dịch vụ và để Tân Minh Giang có cơ hội được phục vụ quý khách !
----------------------------------------------------------------------------------------------------------------------------
CÔNG TY CỔ PHẦN THIẾT BỊ TÂN MINH
Máy nội soi động cơ Flexoscope
Model: 4812-10/4S
Hãng sản xuất: Hazet – Đức
Máy cân bằng lốp
Model: Geodyna® 7600P
Hãng sản xuất: Hofmann (Snap-on)-Mỹ
Sản xuất tại: Italy
Máy ra vào lốp
Model: Monty® 3300-24 smartSpeed plus
Hãng sản xuất: Hofmann (Snap-on)-Mỹ
Sản xuất tại: Italy
3D WHEEL ALIGNER
geoliner® 790 MB-1
The geoliner 790 MB-1 is designed to assist the technician in providing quality alignment measurement and adjustments in full compliance with the Daimler AG
recommended processes. It is designed to work with the Daimler AG “Messplatz Kontrollsystem”, MKS, which is obligatory for every Daimler AG workshop.
MERCEDES-BENZ tool trolley
Article no.: 179N-8-2700/296
Made Hazet- Germany
Vacuum cleaner
Model : PLANET 1/50 OPT ATEX
Made in IPC- Italy
AGC-8280 fully automatic ATF station
Made in Brainbee - Italy
AC-9000D 1234
Made in BRAIN BEE